linuxaudio.org
laa
This list informs subscribers about new releases or events and is not intended for discussion.The announce list is moderated and each post needs to be approved by the list maintainer.
Updated: 13 min 32 sec ago
[LAA] xwax 1.4 release
From: Mark Hills <mark@...>
Subject: [LAA] xwax 1.4 release
Date: Jun 10, 8:28 am 2013
I'm pleased to announce the latest release of xwax -- DJ software for
Linux.
http://xwax.org/
http://xwax.org/releases/xwax-1.4.tar.gz
New features include a fully scalable UI for high-res displays, 'software
pre-amp' and some smaller fixes.
xwax is open-source vinyl emulation software for Linux. It allows DJs and
turntablists to playback digital audio files (MP3, Ogg Vorbis, FLAC, AAC
and more), controlled using a normal pair of turntables via timecoded
vinyls.
It's designed for both beat mixing and scratch mixing. Needle drops, pitch
changes, scratching, spinbacks and rewinds are all supported, and feel
just like the audio is pressed onto the vinyl itself.
The focus is on an accurate vinyl feel which is efficient, stable and
fast.
--
Mark
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] xwax 1.4 release
Date: Jun 10, 8:28 am 2013
I'm pleased to announce the latest release of xwax -- DJ software for
Linux.
http://xwax.org/
http://xwax.org/releases/xwax-1.4.tar.gz
New features include a fully scalable UI for high-res displays, 'software
pre-amp' and some smaller fixes.
xwax is open-source vinyl emulation software for Linux. It allows DJs and
turntablists to playback digital audio files (MP3, Ogg Vorbis, FLAC, AAC
and more), controlled using a normal pair of turntables via timecoded
vinyls.
It's designed for both beat mixing and scratch mixing. Needle drops, pitch
changes, scratching, spinbacks and rewinds are all supported, and feel
just like the audio is pressed onto the vinyl itself.
The focus is on an accurate vinyl feel which is efficient, stable and
fast.
--
Mark
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] setBfree - DSP tonewheel organ
From: Robin Gareus <robin@...>
Subject: [LAA] setBfree - DSP tonewheel organ
Date: Jun 8, 10:03 am 2013
It's been a while since the last announcement.. so here it goes:
setBfree v0.7.2 is out
setBfree is a MIDI-controlled, software synthesizer designed to imitate
the sound and properties of the electromechanical organs and sound
modification devices that brought world-wide fame to the names and
products of Laurens Hammond and Don Leslie.
http://setbfree.org
https://github.com/pantherb/setBfree
The list of changes since the last announcement (0.5) is quite long. The
most prominent new feature is a GUI for the LV2 plugin.
The GUI provides for bi-directional MIDI communication. The graphical
representation follows external controls and the UI can be used to
control automated faders/drawbars from the UI which is particularly
useful when recalling presets/programs.
The LV2 GUI also allows to easily create midi-maps and preset-program
which are compatible with the file-format of the standalone setfree
application.
On that note, we'd like to collect commonly used presets (.pgm) as well
as midi-map (.cfg) files. Please help us out at
https://github.com/pantherb/setBfree/issues/5
In other news, setBfree now..
* honors midi-panic (all notes/sound off)
* generate midmap files corresponding to current config
* LV2 saves/recalls its complete state
* can be reconfigured completely on the fly
* is played by pro organ players in at least 2 churches
* ...
happy playing,
robin + will
PS. there is a known problem with LV2 midi-buffersize for jack1 users.
if you run jack1, you do need a LV2 host that supports
http://lv2plug.in/ns/ext/resize-port -- this includes jalv.gtk from last
week (svn rev 5114), ardour3 since 3.1-95-gcc8dafa and the mod-host.
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] setBfree - DSP tonewheel organ
Date: Jun 8, 10:03 am 2013
It's been a while since the last announcement.. so here it goes:
setBfree v0.7.2 is out
setBfree is a MIDI-controlled, software synthesizer designed to imitate
the sound and properties of the electromechanical organs and sound
modification devices that brought world-wide fame to the names and
products of Laurens Hammond and Don Leslie.
http://setbfree.org
https://github.com/pantherb/setBfree
The list of changes since the last announcement (0.5) is quite long. The
most prominent new feature is a GUI for the LV2 plugin.
The GUI provides for bi-directional MIDI communication. The graphical
representation follows external controls and the UI can be used to
control automated faders/drawbars from the UI which is particularly
useful when recalling presets/programs.
The LV2 GUI also allows to easily create midi-maps and preset-program
which are compatible with the file-format of the standalone setfree
application.
On that note, we'd like to collect commonly used presets (.pgm) as well
as midi-map (.cfg) files. Please help us out at
https://github.com/pantherb/setBfree/issues/5
In other news, setBfree now..
* honors midi-panic (all notes/sound off)
* generate midmap files corresponding to current config
* LV2 saves/recalls its complete state
* can be reconfigured completely on the fly
* is played by pro organ players in at least 2 churches
* ...
happy playing,
robin + will
PS. there is a known problem with LV2 midi-buffersize for jack1 users.
if you run jack1, you do need a LV2 host that supports
http://lv2plug.in/ns/ext/resize-port -- this includes jalv.gtk from last
week (svn rev 5114), ardour3 since 3.1-95-gcc8dafa and the mod-host.
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] Laborejo Release version 0.8 (More of the same - Only better)
From: Nils Gey <ich@...>
Subject: [LAA] Laborejo Release version 0.8 (More of the same - Only better)
Date: Jun 8, 10:03 am 2013
Laborejo 0.8 is released
We are still in Beta.
Streamlining, fixing and making things more robust is the main feature.
However, there are a few new features:
- Swing for Playback mode. In the Performance Signature.
- More preview and export options, especially for Lilypond
- Jack Transport start and stop sync. (Update calfbox as well!)
- "Did you know" help screen and splash dialog (optional)
There is a 0.85 release planned which will deal with making containers, selections and undo work together properly and implementing the last small features on my todo-list.
After 0.85 the plan is to work on speeding up the performance and writing documentation and translations. And the usual bugfixes of course.
This will transition smoothly into a stable 1.0 release
Since Laborejo now becomes more useful and usable with each release it became fair to accept donations.
There is now an extra donation page on the website. Please have a look. Your support would be much appreciated:
http://laborejo.org/Donation
Latest Screenshot:
http://www.laborejo.org/latestscreenshot.png
Download Page:
http://laborejo.org/Download
Greetings,
Nils Gey
Contact: http://laborejo.org/Support_and_Community
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] Laborejo Release version 0.8 (More of the same - Only better)
Date: Jun 8, 10:03 am 2013
Laborejo 0.8 is released
We are still in Beta.
Streamlining, fixing and making things more robust is the main feature.
However, there are a few new features:
- Swing for Playback mode. In the Performance Signature.
- More preview and export options, especially for Lilypond
- Jack Transport start and stop sync. (Update calfbox as well!)
- "Did you know" help screen and splash dialog (optional)
There is a 0.85 release planned which will deal with making containers, selections and undo work together properly and implementing the last small features on my todo-list.
After 0.85 the plan is to work on speeding up the performance and writing documentation and translations. And the usual bugfixes of course.
This will transition smoothly into a stable 1.0 release
Since Laborejo now becomes more useful and usable with each release it became fair to accept donations.
There is now an extra donation page on the website. Please have a look. Your support would be much appreciated:
http://laborejo.org/Donation
Latest Screenshot:
http://www.laborejo.org/latestscreenshot.png
Download Page:
http://laborejo.org/Download
Greetings,
Nils Gey
Contact: http://laborejo.org/Support_and_Community
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] OpenAV Productions : Sorcer Release
From: Harry van Haaren <harryhaaren@...>
Subject: [LAA] OpenAV Productions : Sorcer Release
Date: Jun 8, 10:03 am 2013
--001a11c3717002408b04dd13cd96
Content-Type: text/plain; charset=ISO-8859-1
Hi everybody!
Its my pleasure to announce, that after 9 days the Sorcer wavetable synth's
donation target has been reached. Not only that, but as I prepared to push
the code to github, not one but two more donations arrived.
Wauw. Thank you for kicking off OpenAV productions.
Now for the best part: Sorcer is available!
github.com/harryhaaren/openAV-Sorcer
Also, there's a repo of presets:
github.com/harryhaaren/openAV-presets
Bug reports to github.com/harryhaaren/openAV-Sorcer/issues
I hope you enjoy using Sorcer!
-Harry
--001a11c3717002408b04dd13cd96
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Hi everybody!
Its my =
pleasure to announce, that after 9 days the Sorcer wavetable synth's do=
nation target has been reached. Not only that, but as I prepared to push th=
e code to github, not one but two more donations arrived.
Wauw. Thank you for kicking off OpenAV productions.
=
Now for the best part: Sorcer is available!
/harryhaaren/openAV-Sorcer">github.com/harryhaaren/openAV-Sorcer
>
Also, there's a repo of presets:
harryhaaren/openAV-presets">github.com/harryhaaren/openAV-presets
r>Bug reports to er/issues">github.com/harryhaaren/openAV-Sorcer/issues
I hope you enjoy using Sorcer!
-Harry
--001a11c3717002408b04dd13cd96--
Subject: [LAA] OpenAV Productions : Sorcer Release
Date: Jun 8, 10:03 am 2013
--001a11c3717002408b04dd13cd96
Content-Type: text/plain; charset=ISO-8859-1
Hi everybody!
Its my pleasure to announce, that after 9 days the Sorcer wavetable synth's
donation target has been reached. Not only that, but as I prepared to push
the code to github, not one but two more donations arrived.
Wauw. Thank you for kicking off OpenAV productions.
Now for the best part: Sorcer is available!
github.com/harryhaaren/openAV-Sorcer
Also, there's a repo of presets:
github.com/harryhaaren/openAV-presets
Bug reports to github.com/harryhaaren/openAV-Sorcer/issues
I hope you enjoy using Sorcer!
-Harry
--001a11c3717002408b04dd13cd96
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Hi everybody!
Its my =
pleasure to announce, that after 9 days the Sorcer wavetable synth's do=
nation target has been reached. Not only that, but as I prepared to push th=
e code to github, not one but two more donations arrived.
Wauw. Thank you for kicking off OpenAV productions.
=
Now for the best part: Sorcer is available!
/harryhaaren/openAV-Sorcer">github.com/harryhaaren/openAV-Sorcer
>
Also, there's a repo of presets:
harryhaaren/openAV-presets">github.com/harryhaaren/openAV-presets
r>Bug reports to er/issues">github.com/harryhaaren/openAV-Sorcer/issues
I hope you enjoy using Sorcer!
-Harry
--001a11c3717002408b04dd13cd96--
Categories: laa
[LAA] balance.lv2
From: Robin Gareus <robin@...>
Subject: [LAA] balance.lv2
Date: Jun 8, 10:03 am 2013
I'm happy to announce balance.lv2.
balance.lv2 is a LV2 audio-plugin for stereo balance control with
optional per channel delay released in terms of the GPLv2.
https://github.com/x42/balance.lv2
balance.lv2 facilitates adjusting stereo-microphone recordings (X-Y,
A-B, ORTF). But it also generally useful as "Input Channel Conditioner".
It allows for attenuating the signal on one of the channels as well as
delaying the signals (move away from the microphone). To round off the
feature-set channels can be phase-inverted, swapped and the signal can
be downmixed to mono.
It features a Phase-Correlation meter as well as peak programme meters
according to IEC 60268-18 (5ms integration, 20dB/1.5 sec fall-off) for
input and output signals.
balance.lv2 is *not* a panner. Even though the controls can be linked,
the stereo signal paths are completely independent (except for the
down-mix to mono output routing option).
Many thanks to Chris 'oofus' Goddard who inspired the current signal
flow, beta-tested the plugin and provided very valuable feedback.
Greetings to Jörn Nettingsmeier who nagged me about not having a proper
balance controller in Ardour and motivated this project in the first place.
yours truly,
robin
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] balance.lv2
Date: Jun 8, 10:03 am 2013
I'm happy to announce balance.lv2.
balance.lv2 is a LV2 audio-plugin for stereo balance control with
optional per channel delay released in terms of the GPLv2.
https://github.com/x42/balance.lv2
balance.lv2 facilitates adjusting stereo-microphone recordings (X-Y,
A-B, ORTF). But it also generally useful as "Input Channel Conditioner".
It allows for attenuating the signal on one of the channels as well as
delaying the signals (move away from the microphone). To round off the
feature-set channels can be phase-inverted, swapped and the signal can
be downmixed to mono.
It features a Phase-Correlation meter as well as peak programme meters
according to IEC 60268-18 (5ms integration, 20dB/1.5 sec fall-off) for
input and output signals.
balance.lv2 is *not* a panner. Even though the controls can be linked,
the stereo signal paths are completely independent (except for the
down-mix to mono output routing option).
Many thanks to Chris 'oofus' Goddard who inspired the current signal
flow, beta-tested the plugin and provided very valuable feedback.
Greetings to Jörn Nettingsmeier who nagged me about not having a proper
balance controller in Ardour and motivated this project in the first place.
yours truly,
robin
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] ANN: New Pd-L2Ork x86_64 and Raspberry Pi release now available together with comprehensive how-to
From: Ivica Ico Bukvic <ico@...>
Subject: [LAA] ANN: New Pd-L2Ork x86_64 and Raspberry Pi release now available together with comprehensive how-to
Date: Jun 8, 10:03 am 2013
It is my great pleasure to announce immediate availability of the latest
Pd-L2Ork, its K12 module, as well as the inaugural official version of
Pd-L2Ork for the Raspberry Pi platform. The new release is accompanied by a
comprehensive documentation on how to connect RPi to the computer as well as
run and configure Pd-L2Ork (and its K12 module) for operation on RPi. In
addition, as part of this release, the regular Pd-L2Ork install instructions
have been also streamlined to make them easier to navigate.
Special thanks to NewBlankets Inc. for the Satchmo SuitSup Award that made
our RPi hacking efforts possible!
For more info visit:
http://l2ork.music.vt.edu/main/?page_id=56 (x86_64 version with updated
how-to)
http://l2ork.music.vt.edu/main/?page_id=2288 (Raspberry Pi version download
and how-to)
Changelog highlights:
*Fixed bug
http://sourceforge.net/tracker/index.php?func=detail&aid=2457992&group_id=55
736&atid=478070; hopefully also fixed incorrectly reported hit/selection
boxes for nested structs (like the one reported in the previous bug report)
*added ability for preset_hub to write/read presets or entire scenes from
files. Improved documentation to reflect new additions and to improve
existing.
*added multi-connect option with 5 different modes:
1. shift-click manual multi-connect
2. two selected objects multiple outlets to multiple inlets
3. two or more selected objects connecting to one unselected one
4. one unselected connecting to multiple selected ones
5. multiple selected ones connecting to one's multiple inlets OR the
other way around (determined on whichever mode gives more valid connections)
Option 1 requires use of shift. Other options are based on what is
selected at the time of making the first connection (others are
automatically created based on conditions). Later consider adding special
undo that undos all connections in one step, rather than multiple steps. For
more info, please see Jonathan's recent email on the pd-list:
http://lists.puredata.info/pipermail/pd-list/2013-05/102871.html
*added ability for gop to intelligently detect when iemgui objects fit (or
don't) inside gop window. the same also applies to dynamic changes to iemgui
properties (size, font, label, delta, position, etc.)
*selection box makes patch scroll when reaching patch window edge
*Added support for multiline comments (with some help from Taylor O'Connor
and Jean-Philippe Ouellet).
*disis_wiimote 1.0.4
*added raspbian compile option
*improved logic for freeing rtext that alleviates memory leak but also does
not crash abstractions and gop objects (there are still memory leaks
apparent in l2ork_output~ external which may be linked to individual objects
having incomplete free functions). See
http://sourceforge.net/tracker/?func=detail&aid=3605235&group_id=55736&atid=
478070 for more info
*Fixed segfault bugs with ascseq and ascwave externals
*fixed memory leak (see
https://sourceforge.net/tracker/?func=detail&aid=3605235&group_id=55736&atid
=478070)
*bug fix
http://sourceforge.net/tracker/?func=detail&aid=3605973&group_id=55736&atid=
478072
Complete changelog (without the highlights):
*backported tcl updates to properly support updated pddplink
*fixed segfault when closing array window/subpatch due to lack of checking
of valid resize/move hook pointers
*added example files for the expanded preset_hub documentation
*fixed accelerated displace bug where nested structs did not get properly
tagged/selected
*fixed erroneous meta file generation script
*numerous bug-fixes for mouse down/up and key press combos (e.g.
shift-clicks for multiconnect and dragging within an object) [message continues]
Subject: [LAA] ANN: New Pd-L2Ork x86_64 and Raspberry Pi release now available together with comprehensive how-to
Date: Jun 8, 10:03 am 2013
It is my great pleasure to announce immediate availability of the latest
Pd-L2Ork, its K12 module, as well as the inaugural official version of
Pd-L2Ork for the Raspberry Pi platform. The new release is accompanied by a
comprehensive documentation on how to connect RPi to the computer as well as
run and configure Pd-L2Ork (and its K12 module) for operation on RPi. In
addition, as part of this release, the regular Pd-L2Ork install instructions
have been also streamlined to make them easier to navigate.
Special thanks to NewBlankets Inc. for the Satchmo SuitSup Award that made
our RPi hacking efforts possible!
For more info visit:
http://l2ork.music.vt.edu/main/?page_id=56 (x86_64 version with updated
how-to)
http://l2ork.music.vt.edu/main/?page_id=2288 (Raspberry Pi version download
and how-to)
Changelog highlights:
*Fixed bug
http://sourceforge.net/tracker/index.php?func=detail&aid=2457992&group_id=55
736&atid=478070; hopefully also fixed incorrectly reported hit/selection
boxes for nested structs (like the one reported in the previous bug report)
*added ability for preset_hub to write/read presets or entire scenes from
files. Improved documentation to reflect new additions and to improve
existing.
*added multi-connect option with 5 different modes:
1. shift-click manual multi-connect
2. two selected objects multiple outlets to multiple inlets
3. two or more selected objects connecting to one unselected one
4. one unselected connecting to multiple selected ones
5. multiple selected ones connecting to one's multiple inlets OR the
other way around (determined on whichever mode gives more valid connections)
Option 1 requires use of shift. Other options are based on what is
selected at the time of making the first connection (others are
automatically created based on conditions). Later consider adding special
undo that undos all connections in one step, rather than multiple steps. For
more info, please see Jonathan's recent email on the pd-list:
http://lists.puredata.info/pipermail/pd-list/2013-05/102871.html
*added ability for gop to intelligently detect when iemgui objects fit (or
don't) inside gop window. the same also applies to dynamic changes to iemgui
properties (size, font, label, delta, position, etc.)
*selection box makes patch scroll when reaching patch window edge
*Added support for multiline comments (with some help from Taylor O'Connor
and Jean-Philippe Ouellet).
*disis_wiimote 1.0.4
*added raspbian compile option
*improved logic for freeing rtext that alleviates memory leak but also does
not crash abstractions and gop objects (there are still memory leaks
apparent in l2ork_output~ external which may be linked to individual objects
having incomplete free functions). See
http://sourceforge.net/tracker/?func=detail&aid=3605235&group_id=55736&atid=
478070 for more info
*Fixed segfault bugs with ascseq and ascwave externals
*fixed memory leak (see
https://sourceforge.net/tracker/?func=detail&aid=3605235&group_id=55736&atid
=478070)
*bug fix
http://sourceforge.net/tracker/?func=detail&aid=3605973&group_id=55736&atid=
478072
Complete changelog (without the highlights):
*backported tcl updates to properly support updated pddplink
*fixed segfault when closing array window/subpatch due to lack of checking
of valid resize/move hook pointers
*added example files for the expanded preset_hub documentation
*fixed accelerated displace bug where nested structs did not get properly
tagged/selected
*fixed erroneous meta file generation script
*numerous bug-fixes for mouse down/up and key press combos (e.g.
shift-clicks for multiconnect and dragging within an object) [message continues]
Categories: laa
[LAA] Qtractor 0.5.9 - The Juliet Quebec release
From: Rui Nuno Capela <rncbc@...>
Subject: [LAA] Qtractor 0.5.9 - The Juliet Quebec release
Date: Jun 8, 10:02 am 2013
As an anticipated summer delight...
Qtractor 0.5.9 (juliet quebec) is now released!
Release highlights:
* NSM support (NEW)
* Audio buses plugin state restoration (FIX)
* MIDI channel file merge/export (FIX)
* MIDI editor rescale mode (NEW)
* German translation (NEW)
Website:
http://qtractor.sourceforge.net
Project page:
http://sourceforge.net/projects/qtractor
Downloads:
http://sourceforge.net/projects/qtractor/files
- source tarball:
http://downloads.sourceforge.net/qtractor/qtractor-0.5.9.tar.gz
- source package (openSUSE 12.3):
http://downloads.sourceforge.net/qtractor/qtractor-0.5.9-6.rncbc.suse123.src.rpm
- binary packages (openSUSE 12.3):
http://downloads.sourceforge.net/qtractor/qtractor-0.5.9-6.rncbc.suse123.i586.rpm
http://downloads.sourceforge.net/qtractor/qtractor-0.5.9-6.rncbc.suse123.x86_64.rpm
- quick start guide & user manual:
http://downloads.sourceforge.net/qtractor/qtractor-0.5.x-user-manual.pdf
Weblog (upstream support):
http://www.rncbc.org
License:
Qtractor is free, open-source software, distributed under the terms
of the GNU General Public License (GPL) version 2 or later.
Change-log:
- Auto-incremental version numbering of backup session files; brand new
versioning mode option added.
- Fixed one long as ever MIDI file export bug, which was about washing
all self-induced MIDI bank-select (CC#0, CC#32) and program-change (PC#)
events into MIDI channel 1, regardless of the source track/channel.
- Fixed initial sample-rate settlement on plugin chains for all tracks
and buses whenever a session file original sample-rate differs from the
current audio device engine (ie. JACK).
- New German (de) translation added (by Guido Scholz, thanks).
- Now accepting JACK transport tempo and time-tignature changes while in
slave transport mode.
- Fix ref-count and auto-removal of created files that result from clip
merge/export when session is closed but not saved.
- MIDI track instrument bank/program selection, from plugin UIs that
support it, is now effectively and complete.
- Custom connections for dedicated audio outputs from all plugin chains
in MIDI tracks or buses are back in business, hopefully restored gain on
session load (ticket by yuba, thanks).
- Track Properties dialog now dirty after any plugin related change
(another head-up by yuba, thanks again).
- Tempo Map/Markers dialog is not set initially dirty anymore.
- Audio buses plugin state's persistence were found AWOL: while being
properly saved as usual, were being restored to default on every session
reload (as noticed by yuba, thanks).
- NSM (Non Session Management) support is being introduced.
- The MIDI clip editor (aka. piano-roll) gets a brand new rescale mode:
ctrl+dragging the right edge of a note now rescales all times and
duration of all the subsequent selected notes (after an interesting
idea/ticket by Joel Leclerc, thanks).
- The new MIDI clip editor rescale mode also applicable to event values
(eg. note velocities, pitch-bend), while ctrl+dragging the edges of an
event vertical bar.
- VST plugin (GUI) idle timer makes a comeback.
- Hard-wired LV2 UI selection order for plugins which supply more than
one option (lv2_external_ui gets always honored first then, as provided
via libsuil, X11, GTK and last but not least, Qt4).
See also:
http://www.rncbc.org/drupal/node/664
Have (lots of) fun.
--
rncbc aka Rui Nuno Capela
rncbc@rncbc.org
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] Qtractor 0.5.9 - The Juliet Quebec release
Date: Jun 8, 10:02 am 2013
As an anticipated summer delight...
Qtractor 0.5.9 (juliet quebec) is now released!
Release highlights:
* NSM support (NEW)
* Audio buses plugin state restoration (FIX)
* MIDI channel file merge/export (FIX)
* MIDI editor rescale mode (NEW)
* German translation (NEW)
Website:
http://qtractor.sourceforge.net
Project page:
http://sourceforge.net/projects/qtractor
Downloads:
http://sourceforge.net/projects/qtractor/files
- source tarball:
http://downloads.sourceforge.net/qtractor/qtractor-0.5.9.tar.gz
- source package (openSUSE 12.3):
http://downloads.sourceforge.net/qtractor/qtractor-0.5.9-6.rncbc.suse123.src.rpm
- binary packages (openSUSE 12.3):
http://downloads.sourceforge.net/qtractor/qtractor-0.5.9-6.rncbc.suse123.i586.rpm
http://downloads.sourceforge.net/qtractor/qtractor-0.5.9-6.rncbc.suse123.x86_64.rpm
- quick start guide & user manual:
http://downloads.sourceforge.net/qtractor/qtractor-0.5.x-user-manual.pdf
Weblog (upstream support):
http://www.rncbc.org
License:
Qtractor is free, open-source software, distributed under the terms
of the GNU General Public License (GPL) version 2 or later.
Change-log:
- Auto-incremental version numbering of backup session files; brand new
versioning mode option added.
- Fixed one long as ever MIDI file export bug, which was about washing
all self-induced MIDI bank-select (CC#0, CC#32) and program-change (PC#)
events into MIDI channel 1, regardless of the source track/channel.
- Fixed initial sample-rate settlement on plugin chains for all tracks
and buses whenever a session file original sample-rate differs from the
current audio device engine (ie. JACK).
- New German (de) translation added (by Guido Scholz, thanks).
- Now accepting JACK transport tempo and time-tignature changes while in
slave transport mode.
- Fix ref-count and auto-removal of created files that result from clip
merge/export when session is closed but not saved.
- MIDI track instrument bank/program selection, from plugin UIs that
support it, is now effectively and complete.
- Custom connections for dedicated audio outputs from all plugin chains
in MIDI tracks or buses are back in business, hopefully restored gain on
session load (ticket by yuba, thanks).
- Track Properties dialog now dirty after any plugin related change
(another head-up by yuba, thanks again).
- Tempo Map/Markers dialog is not set initially dirty anymore.
- Audio buses plugin state's persistence were found AWOL: while being
properly saved as usual, were being restored to default on every session
reload (as noticed by yuba, thanks).
- NSM (Non Session Management) support is being introduced.
- The MIDI clip editor (aka. piano-roll) gets a brand new rescale mode:
ctrl+dragging the right edge of a note now rescales all times and
duration of all the subsequent selected notes (after an interesting
idea/ticket by Joel Leclerc, thanks).
- The new MIDI clip editor rescale mode also applicable to event values
(eg. note velocities, pitch-bend), while ctrl+dragging the edges of an
event vertical bar.
- VST plugin (GUI) idle timer makes a comeback.
- Hard-wired LV2 UI selection order for plugins which supply more than
one option (lv2_external_ui gets always honored first then, as provided
via libsuil, X11, GTK and last but not least, Qt4).
See also:
http://www.rncbc.org/drupal/node/664
Have (lots of) fun.
--
rncbc aka Rui Nuno Capela
rncbc@rncbc.org
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] Vee One Suite 0.3.3 - Late spring blossoming
From: Rui Nuno Capela <rncbc@...>
Subject: [LAA] Vee One Suite 0.3.3 - Late spring blossoming
Date: Jun 8, 10:02 am 2013
hello june,
a new batch of the so called Vee One Suite of old-school software
instruments is out: synthv1 [1] polyphonic synthesizer, samplv1 [2]
polyphonic sampler and drumkv1 [3] drum-kit sampler, are slowly maturing.
as before delivered still in dual forms, each with their own amenities:
- a pure stand-alone JACK client with JACK-session, NSM (Non session
management) and both JACK MIDI and ALSA MIDI input support;
- a LV2 instrument plugin.
major release highlights:
- LV2 External UI extension support;
- NSM (Non session management) support.
aha, and each one of the contraptions also got their own ordinary icon
color personalities, whatever. I'm sure you'll notice.
all free, open-source Linux Audio software, distributed under the terms
of the GNU General Public License (GPL) version 2 or later.
there they are:
[1] synthv1 - an old-school polyphonic synthesizer
synthv1 is an old-school all-digital 4-oscillator subtractive
polyphonic synthesizer with stereo fx.
LV2 URI: http://synthv1.sourceforge.net/lv2
website:
http://synthv1.sourceforge.net
downloads:
http://sourceforge.net/projects/synthv1/files
- source tarball:
http://download.sourceforge.net/synthv1/synthv1-0.3.3.tar.gz
- source package:
http://download.sourceforge.net/synthv1/synthv1-0.3.3-10.rncbc.suse123.src.rpm
- binary packages:
http://download.sourceforge.net/synthv1/synthv1-0.3.3-10.rncbc.suse123.i586.rpm
http://download.sourceforge.net/synthv1/synthv1-0.3.3-10.rncbc.suse123.x86_84.rpm
[2] samplv1 - an old-school polyphonic sampler
samplv1 is an(other) old-school all-digital polyphonic sampler
synthesizer with stereo fx.
LV2 URI: http://samplv1.sourceforge.net/lv2
website:
http://samplv1.sourceforge.net
downloads:
http://sourceforge.net/projects/samplv1/files
- source tarball:
http://download.sourceforge.net/samplv1/samplv1-0.3.3.tar.gz
- source package:
http://download.sourceforge.net/samplv1/samplv1-0.3.3-10.rncbc.suse123.src.rpm
- binary packages:
http://download.sourceforge.net/samplv1/samplv1-0.3.3-10.rncbc.suse123.i586.rpm
http://download.sourceforge.net/samplv1/samplv1-0.3.3-10.rncbc.suse123.x86_84.rpm
[3] drumkv1 - an old-school drum-kit sampler
drumkv1 is (yet) an(other) old-school all-digital drum-kit sampler
synthesizer with stereo fx.
LV2 URI: http://drumkv1.sourceforge.net/lv2
website:
http://drumkv1.sourceforge.net
downloads:
http://sourceforge.net/projects/drumkv1/files
- source tarball:
http://download.sourceforge.net/drumkv1/drumkv1-0.3.3.tar.gz
- source package:
http://download.sourceforge.net/drumkv1/drumkv1-0.3.3-6.rncbc.suse123.src.rpm
- binary packages:
http://download.sourceforge.net/drumkv1/drumkv1-0.3.3-6.rncbc.suse123.i586.rpm
http://download.sourceforge.net/drumkv1/drumkv1-0.3.3-6.rncbc.suse123.x86_84.rpm
see also:
http://www.rncbc.org/drupal/node/661
enjoy && rave on!
--
rncbc aka Rui Nuno Capela
rncbc@rncbc.org
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] Vee One Suite 0.3.3 - Late spring blossoming
Date: Jun 8, 10:02 am 2013
hello june,
a new batch of the so called Vee One Suite of old-school software
instruments is out: synthv1 [1] polyphonic synthesizer, samplv1 [2]
polyphonic sampler and drumkv1 [3] drum-kit sampler, are slowly maturing.
as before delivered still in dual forms, each with their own amenities:
- a pure stand-alone JACK client with JACK-session, NSM (Non session
management) and both JACK MIDI and ALSA MIDI input support;
- a LV2 instrument plugin.
major release highlights:
- LV2 External UI extension support;
- NSM (Non session management) support.
aha, and each one of the contraptions also got their own ordinary icon
color personalities, whatever. I'm sure you'll notice.
all free, open-source Linux Audio software, distributed under the terms
of the GNU General Public License (GPL) version 2 or later.
there they are:
[1] synthv1 - an old-school polyphonic synthesizer
synthv1 is an old-school all-digital 4-oscillator subtractive
polyphonic synthesizer with stereo fx.
LV2 URI: http://synthv1.sourceforge.net/lv2
website:
http://synthv1.sourceforge.net
downloads:
http://sourceforge.net/projects/synthv1/files
- source tarball:
http://download.sourceforge.net/synthv1/synthv1-0.3.3.tar.gz
- source package:
http://download.sourceforge.net/synthv1/synthv1-0.3.3-10.rncbc.suse123.src.rpm
- binary packages:
http://download.sourceforge.net/synthv1/synthv1-0.3.3-10.rncbc.suse123.i586.rpm
http://download.sourceforge.net/synthv1/synthv1-0.3.3-10.rncbc.suse123.x86_84.rpm
[2] samplv1 - an old-school polyphonic sampler
samplv1 is an(other) old-school all-digital polyphonic sampler
synthesizer with stereo fx.
LV2 URI: http://samplv1.sourceforge.net/lv2
website:
http://samplv1.sourceforge.net
downloads:
http://sourceforge.net/projects/samplv1/files
- source tarball:
http://download.sourceforge.net/samplv1/samplv1-0.3.3.tar.gz
- source package:
http://download.sourceforge.net/samplv1/samplv1-0.3.3-10.rncbc.suse123.src.rpm
- binary packages:
http://download.sourceforge.net/samplv1/samplv1-0.3.3-10.rncbc.suse123.i586.rpm
http://download.sourceforge.net/samplv1/samplv1-0.3.3-10.rncbc.suse123.x86_84.rpm
[3] drumkv1 - an old-school drum-kit sampler
drumkv1 is (yet) an(other) old-school all-digital drum-kit sampler
synthesizer with stereo fx.
LV2 URI: http://drumkv1.sourceforge.net/lv2
website:
http://drumkv1.sourceforge.net
downloads:
http://sourceforge.net/projects/drumkv1/files
- source tarball:
http://download.sourceforge.net/drumkv1/drumkv1-0.3.3.tar.gz
- source package:
http://download.sourceforge.net/drumkv1/drumkv1-0.3.3-6.rncbc.suse123.src.rpm
- binary packages:
http://download.sourceforge.net/drumkv1/drumkv1-0.3.3-6.rncbc.suse123.i586.rpm
http://download.sourceforge.net/drumkv1/drumkv1-0.3.3-6.rncbc.suse123.x86_84.rpm
see also:
http://www.rncbc.org/drupal/node/661
enjoy && rave on!
--
rncbc aka Rui Nuno Capela
rncbc@rncbc.org
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] gst123-0.3.3
From: Stefan Westerfeld <stefan@...>
Subject: [LAA] gst123-0.3.3
Date: Jun 8, 10:02 am 2013
gst123-0.3.3 has been released.
Overview of changes in gst123-0.3.3:
------------------------------------
* Fix Issue 10: Local files not properly escaped when converted to URLs
* Added "-k, --skip=" option: skip first 'n' seconds [Tobias Bengfort]
What is gst123?
---------------
The program gst123 is designed to be a more flexible command line player in the
spirit of ogg123 and mpg123, based on gstreamer. It plays all file formats
gstreamer understands, so if you have a music collection which contains
different file formats, like flac, ogg and mp3, you can use gst123 to play all
your music files.
Since gst123-0.1.0 support for watching videos has been added; however gst123
should run fine in situations where no X11 display is available; videos can be
played without X11 display, too (-x, --novideo); in this case, only the audio
stream will be played.
It is implemented in C++ and licensed under the GNU LGPL version 2
Links:
------
Website: http://space.twc.de/~stefan/gst123.php
Download: http://space.twc.de/~stefan/gst123/gst123-0.3.3.tar.bz2
--
Stefan Westerfeld, Hamburg/Germany, http://space.twc.de/~stefan
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] gst123-0.3.3
Date: Jun 8, 10:02 am 2013
gst123-0.3.3 has been released.
Overview of changes in gst123-0.3.3:
------------------------------------
* Fix Issue 10: Local files not properly escaped when converted to URLs
* Added "-k, --skip=" option: skip first 'n' seconds [Tobias Bengfort]
What is gst123?
---------------
The program gst123 is designed to be a more flexible command line player in the
spirit of ogg123 and mpg123, based on gstreamer. It plays all file formats
gstreamer understands, so if you have a music collection which contains
different file formats, like flac, ogg and mp3, you can use gst123 to play all
your music files.
Since gst123-0.1.0 support for watching videos has been added; however gst123
should run fine in situations where no X11 display is available; videos can be
played without X11 display, too (-x, --novideo); in this case, only the audio
stream will be played.
It is implemented in C++ and licensed under the GNU LGPL version 2
Links:
------
Website: http://space.twc.de/~stefan/gst123.php
Download: http://space.twc.de/~stefan/gst123/gst123-0.3.3.tar.bz2
--
Stefan Westerfeld, Hamburg/Germany, http://space.twc.de/~stefan
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] njconnect 1.3
From: Pawel <xj@...>
Subject: [LAA] njconnect 1.3
Date: Jun 8, 10:02 am 2013
Hi,
I want to disclose njconnect 1.3 version.
Well .. njconnect is ncurses jack connection manager, you can get it from here (if your distro doesn't provide it yet)
https://sourceforge.net/projects/njconnect/
Colossal thanks for G.raud Meyer for lots of fixes (this was mentioned also in source).
Changes since v1.2:
- support terminal resize
- better handling stderr messages (including jack SPAM)
- select next entry after disconnect
- Add more keybindings
- Add real help window
- fix potential segfault
Best Regards
Pawel / Xj
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] njconnect 1.3
Date: Jun 8, 10:02 am 2013
Hi,
I want to disclose njconnect 1.3 version.
Well .. njconnect is ncurses jack connection manager, you can get it from here (if your distro doesn't provide it yet)
https://sourceforge.net/projects/njconnect/
Colossal thanks for G.raud Meyer for lots of fixes (this was mentioned also in source).
Changes since v1.2:
- support terminal resize
- better handling stderr messages (including jack SPAM)
- select next entry after disconnect
- Add more keybindings
- Add real help window
- fix potential segfault
Best Regards
Pawel / Xj
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] io GNU/Linux v2 beta2 out :) (rt kernel image too)
From: MK aka El Doctor <el.doctor@...>
Subject: [LAA] io GNU/Linux v2 beta2 out :) (rt kernel image too)
Date: Jun 8, 10:01 am 2013
--nextPart15736768.vAftn5OsBS
Content-Type: Text/Plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi,
I'm happy to share with you a new beta release of io GNU/Linux.
The live is based on the free operating system Debian (sid)... and includes=
a=20
large collection of preinstalled programs for all uses, especially multimed=
ia=20
creation.
If your looking for a version with realtime kernel, check:=20
http://mk.biniou.net/iognulinux.html
(without any warranty... doesn't work on some computers, depending mostly o=
f=20
the video card)
=46eedbacks welcome, enjoy :)
http://mk.biniou.net/iognulinux.html
https://sourceforge.net/projects/io-gnu-linux
--nextPart15736768.vAftn5OsBS
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEABECAAYFAlGaK3wACgkQNH1Gr/cAWUVP6gCbBeCOG8IEIGt7Y2MjCmhwFuwI
UTkAn2o7JhyMr3wq/pkTaHipUlID5BjE
=sI2t
-----END PGP SIGNATURE-----
--nextPart15736768.vAftn5OsBS--
Subject: [LAA] io GNU/Linux v2 beta2 out :) (rt kernel image too)
Date: Jun 8, 10:01 am 2013
--nextPart15736768.vAftn5OsBS
Content-Type: Text/Plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi,
I'm happy to share with you a new beta release of io GNU/Linux.
The live is based on the free operating system Debian (sid)... and includes=
a=20
large collection of preinstalled programs for all uses, especially multimed=
ia=20
creation.
If your looking for a version with realtime kernel, check:=20
http://mk.biniou.net/iognulinux.html
(without any warranty... doesn't work on some computers, depending mostly o=
f=20
the video card)
=46eedbacks welcome, enjoy :)
http://mk.biniou.net/iognulinux.html
https://sourceforge.net/projects/io-gnu-linux
--nextPart15736768.vAftn5OsBS
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEABECAAYFAlGaK3wACgkQNH1Gr/cAWUVP6gCbBeCOG8IEIGt7Y2MjCmhwFuwI
UTkAn2o7JhyMr3wq/pkTaHipUlID5BjE
=sI2t
-----END PGP SIGNATURE-----
--nextPart15736768.vAftn5OsBS--
Categories: laa
[LAA] Rivendell v2.5.1
From: Fred Gleason <fredg@...>
Subject: [LAA] Rivendell v2.5.1
Date: Jun 8, 10:01 am 2013
On behalf of the entire Rivendell development team, I'm pleased to announce the availability of Rivendell v2.5.1. Rivendell is a full-featured radio automation system targeted for use in professional broadcast environments. It is available under the GNU General Public License.
>From the NEWS file:
*** snip snip ***
If upgrading from a v1.x version of Rivendell, be sure to read the
'UPGRADING' file before proceeding for important information.
Changes:
Mass Object Deletion. Added an rddelete(1) command-line tool to
aid in the mass deletion of carts and logs. Do rddelete --help
for more information.
NexGen Importer. Added PKT file support to nexgen_filter(1).
Multiple bug fixes. See the ChangeLog for details.
Database Update:
This version of Rivendell uses database schema version 220, and will
automatically upgrade any earlier versions. To see the current schema
version prior to upgrade, see RDAdmin->SystemInfo.
As always, be sure to run RDAdmin immediately after upgrading to allow
any necessary changes to the database schema to be applied.
*** snip snip ***
Further information, screenshots and download links are available at:
http://www.rivendellaudio.org/
Cheers!
|-------------------------------------------------------------------------|
| Frederick F. Gleason, Jr. | Chief Developer |
| | Paravel Systems |
|-------------------------------------------------------------------------|
| A rock pile ceases to be a rock pile the moment a single man |
| contemplates it, bearing within him the image of a cathedral. |
| -- Antoine de Saint-Exupery |
|-------------------------------------------------------------------------|
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] Rivendell v2.5.1
Date: Jun 8, 10:01 am 2013
On behalf of the entire Rivendell development team, I'm pleased to announce the availability of Rivendell v2.5.1. Rivendell is a full-featured radio automation system targeted for use in professional broadcast environments. It is available under the GNU General Public License.
>From the NEWS file:
*** snip snip ***
If upgrading from a v1.x version of Rivendell, be sure to read the
'UPGRADING' file before proceeding for important information.
Changes:
Mass Object Deletion. Added an rddelete(1) command-line tool to
aid in the mass deletion of carts and logs. Do rddelete --help
for more information.
NexGen Importer. Added PKT file support to nexgen_filter(1).
Multiple bug fixes. See the ChangeLog for details.
Database Update:
This version of Rivendell uses database schema version 220, and will
automatically upgrade any earlier versions. To see the current schema
version prior to upgrade, see RDAdmin->SystemInfo.
As always, be sure to run RDAdmin immediately after upgrading to allow
any necessary changes to the database schema to be applied.
*** snip snip ***
Further information, screenshots and download links are available at:
http://www.rivendellaudio.org/
Cheers!
|-------------------------------------------------------------------------|
| Frederick F. Gleason, Jr. | Chief Developer |
| | Paravel Systems |
|-------------------------------------------------------------------------|
| A rock pile ceases to be a rock pile the moment a single man |
| contemplates it, bearing within him the image of a cathedral. |
| -- Antoine de Saint-Exupery |
|-------------------------------------------------------------------------|
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] Fwd: Matching Pursuit Toolkit (MPTK) 0.7 released
From: Dan S <danstowell+lxau@...>
Subject: [LAA] Fwd: Matching Pursuit Toolkit (MPTK) 0.7 released
Date: May 16, 8:55 am 2013
Dear all,
Matching Pursuit Toolkit (MPTK) is a fast and efficient library (with
Matlab and Python wrappers, and commandline tools) for the sparse
decomposition of multichannel audio signals. Version 0.7 is now
officially released:
https://gforge.inria.fr/frs/?group_id=36
Changes in 0.7:
* New pyMPTK wrapper, enables direct use of MPTK within Python
* Enabled GPD with the Dirac, Constant and Nyquist blocks
* Anywave block now working from command-line mpd and mpr
* Improved XML parsing of books (note: the API to use for writing new
plugins changes as a result of this; and MPTK books are now written
with an outer tag surrounding book and dict)
* Slight Matlab API change: second “dict” arg now needed for
reconstruct(book, dict)
Best
Dan
--
http://www.mcld.co.uk
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] Fwd: Matching Pursuit Toolkit (MPTK) 0.7 released
Date: May 16, 8:55 am 2013
Dear all,
Matching Pursuit Toolkit (MPTK) is a fast and efficient library (with
Matlab and Python wrappers, and commandline tools) for the sparse
decomposition of multichannel audio signals. Version 0.7 is now
officially released:
https://gforge.inria.fr/frs/?group_id=36
Changes in 0.7:
* New pyMPTK wrapper, enables direct use of MPTK within Python
* Enabled GPD with the Dirac, Constant and Nyquist blocks
* Anywave block now working from command-line mpd and mpr
* Improved XML parsing of books (note: the API to use for writing new
plugins changes as a result of this; and MPTK books are now written
with an outer tag surrounding book and dict)
* Slight Matlab API change: second “dict” arg now needed for
reconstruct(book, dict)
Best
Dan
--
http://www.mcld.co.uk
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] vst-bridge 0.1
From: Alexandre Bique <bique.alexandre@...>
Subject: [LAA] vst-bridge 0.1
Date: May 16, 8:55 am 2013
Hi,
I'm proud to announce vst-bridge 0.1.
This is a bridge to run Windows VST plugins (both 32 and 64 bits) with
Linux VST hosts.
= How to use it? =
Let's suppose that you have installed vst-bridge in ~/local/ and
you have a windows VST installed in ~/.wine/drive_c/VST/Synth1/Synth1.dll
First you have to create a directory for your bridges:
$ mkdir ~/.vst-bridges
Then you can create your first bridge:
$ ~/local/bin/vst-bridge-maker ~/.wine/drive_c/VST/Synth1/Synth1.dll
~/.vst-bridges/Synth1.so
Now edit ~/.bashrc and add $HOME/.vst-bridges/ to VST_PATH. Mine looks like:
export VST_PATH=/usr/lib/vst/:$HOME/.vst-bridges/
Then you can start your favorite DAW, ask him to scan plugins again and enjoy!
= Architecture =
A typical installation looks like:
/home/abique/local/
/home/abique/local/bin
/home/abique/local/bin/vst-bridge-maker
/home/abique/local/lib
/home/abique/local/lib/vst-bridge
/home/abique/local/lib/vst-bridge/vst-bridge-plugin-tpl.so
/home/abique/local/lib/vst-bridge/vst-bridge-host-32.exe
/home/abique/local/lib/vst-bridge/vst-bridge-host-32.exe.so
/home/abique/local/lib/vst-bridge/vst-bridge-host-64.exe
/home/abique/local/lib/vst-bridge/vst-bridge-host-64.exe.so
vst-bridge.so is a Linux VST plugin which has space reserved for the windows
plugin path.
vst-bridge-maker creates a dedicated .so for a single Windows VST
plugin by copying vst-bridge-plugin-tpl.so and updating the path to the
Windows VST and the path to the corresponding host (32 bits or 64 bits).
vst-bridge-host-(32|64).exe hosts a Windows VST and communicates with
.so.
.so spawns a new wine process vst-bridge-host-(32|64).exe and
passes the path to the Windows VST plugin.
You can find the source code released under the MIT license at
https://github.com/abique/vst-bridge
You can also find binary tarball at
http://88.191.147.34:4242/vst-bridge/vst-bridge-0.1.tar.gz
It has been reported to work with: Synth1, ReFx Nexus, u-he Diva,
ABL2, epicVerb, NastyDLAmkII.
I had issues with : Oatmeals, NI Reaktor.
Thanks for your attention. I hope you'll enjoy it.
--
Alexandre Bique
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] vst-bridge 0.1
Date: May 16, 8:55 am 2013
Hi,
I'm proud to announce vst-bridge 0.1.
This is a bridge to run Windows VST plugins (both 32 and 64 bits) with
Linux VST hosts.
= How to use it? =
Let's suppose that you have installed vst-bridge in ~/local/ and
you have a windows VST installed in ~/.wine/drive_c/VST/Synth1/Synth1.dll
First you have to create a directory for your bridges:
$ mkdir ~/.vst-bridges
Then you can create your first bridge:
$ ~/local/bin/vst-bridge-maker ~/.wine/drive_c/VST/Synth1/Synth1.dll
~/.vst-bridges/Synth1.so
Now edit ~/.bashrc and add $HOME/.vst-bridges/ to VST_PATH. Mine looks like:
export VST_PATH=/usr/lib/vst/:$HOME/.vst-bridges/
Then you can start your favorite DAW, ask him to scan plugins again and enjoy!
= Architecture =
A typical installation looks like:
/home/abique/local/
/home/abique/local/bin
/home/abique/local/bin/vst-bridge-maker
/home/abique/local/lib
/home/abique/local/lib/vst-bridge
/home/abique/local/lib/vst-bridge/vst-bridge-plugin-tpl.so
/home/abique/local/lib/vst-bridge/vst-bridge-host-32.exe
/home/abique/local/lib/vst-bridge/vst-bridge-host-32.exe.so
/home/abique/local/lib/vst-bridge/vst-bridge-host-64.exe
/home/abique/local/lib/vst-bridge/vst-bridge-host-64.exe.so
vst-bridge.so is a Linux VST plugin which has space reserved for the windows
plugin path.
vst-bridge-maker creates a dedicated .so for a single Windows VST
plugin by copying vst-bridge-plugin-tpl.so and updating the path to the
Windows VST and the path to the corresponding host (32 bits or 64 bits).
vst-bridge-host-(32|64).exe hosts a Windows VST and communicates with
.so.
.so spawns a new wine process vst-bridge-host-(32|64).exe and
passes the path to the Windows VST plugin.
You can find the source code released under the MIT license at
https://github.com/abique/vst-bridge
You can also find binary tarball at
http://88.191.147.34:4242/vst-bridge/vst-bridge-0.1.tar.gz
It has been reported to work with: Synth1, ReFx Nexus, u-he Diva,
ABL2, epicVerb, NastyDLAmkII.
I had issues with : Oatmeals, NI Reaktor.
Thanks for your attention. I hope you'll enjoy it.
--
Alexandre Bique
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] Denemo 1.0.2 released!
From: Jeremiah Benham <jjbenham@...>
Subject: [LAA] Denemo 1.0.2 released!
Date: May 16, 8:55 am 2013
--001a11c3d8d052933b04dcb3c6b6
Content-Type: text/plain; charset=ISO-8859-1
Denemo 1.0.2 has been released!
New features in this version:
*Wysiwyg Improvements
* Dragging now shows the object as you drag moving over
the score
* Dragging of objects attached to notes can now be done
* Slurs can be re-shaped
* Chord Symbols
* Place chords on a separate staff and have them
automatically typeset as Chord Symbols
* Bug Fixes
* Octave playback bug fixed
Linux Binary:
http://denemo.org/downloads/denemo-1.0.2-0.linux-x86
Source:
http://denemo.org/downloads/denemo-1.0.2.tar.gz
--001a11c3d8d052933b04dcb3c6b6
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Denemo 1.=
0.2 has been released!
New features in this version:
*Wysiwyg =
Improvements
* Dragging now shows the object as you drag moving over
> the score
* Dragging of objects attached to notes can now be done
* Slurs can be=
re-shaped
* Chord Symbols
* Place chords on a separate staff and h=
ave them
automatically typeset as Chord Symbols
* Bug Fixes
>
* Octave playback bug fixed
--001a11c3d8d052933b04dcb3c6b6--
Subject: [LAA] Denemo 1.0.2 released!
Date: May 16, 8:55 am 2013
--001a11c3d8d052933b04dcb3c6b6
Content-Type: text/plain; charset=ISO-8859-1
Denemo 1.0.2 has been released!
New features in this version:
*Wysiwyg Improvements
* Dragging now shows the object as you drag moving over
the score
* Dragging of objects attached to notes can now be done
* Slurs can be re-shaped
* Chord Symbols
* Place chords on a separate staff and have them
automatically typeset as Chord Symbols
* Bug Fixes
* Octave playback bug fixed
Linux Binary:
http://denemo.org/downloads/denemo-1.0.2-0.linux-x86
Source:
http://denemo.org/downloads/denemo-1.0.2.tar.gz
--001a11c3d8d052933b04dcb3c6b6
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Denemo 1.=
0.2 has been released!
New features in this version:
*Wysiwyg =
Improvements
* Dragging now shows the object as you drag moving over
> the score
* Dragging of objects attached to notes can now be done
* Slurs can be=
re-shaped
* Chord Symbols
* Place chords on a separate staff and h=
ave them
automatically typeset as Chord Symbols
* Bug Fixes
>
* Octave playback bug fixed
Linux Binary:
ref=3D"http://denemo.org/downloads/denemo-1.0.2-0.linux-x86">http://denemo.=
org/downloads/denemo-1.0.2-0.linux-x86
Source:
ttp://denemo.org/downloads/denemo-1.0.2.tar.gz">http://denemo.org/downloads=
/denemo-1.0.2.tar.gz
--001a11c3d8d052933b04dcb3c6b6--
Categories: laa
[LAA] [ANN] Praxis LIVE build:130508
From: Neil C Smith <neilcsmith.net@...>
Subject: [LAA] [ANN] Praxis LIVE build:130508
Date: May 13, 3:34 pm 2013
--001a11c222ba556b4304dc9a3a4c
Content-Type: text/plain; charset=ISO-8859-1
Hi All,
A new build of Praxis LIVE is now available for download.
Praxis LIVE is an open-source, graphical environment for rapid
development of intermedia performance tools, projections and
interactive spaces. This release brings a range of new features for the
video pipeline, OSC control, some major editing improvements (including
copy & paste - who knew that would be so difficult to implement! :-) ), and
the rather obviously missing stereo sample player, amongst many other
tweaks and bug fixes.
Praxis LIVE is available as a Linux .deb package, Windows .exe installer
and as a .zip for un-installed usage (installed usage is recommended).
Website (with downloads and manual) - http://code.google.com/p/praxis
Release notes - http://code.google.com/p/praxis/wiki/ReleaseNotes
Some of the new features are conspicuously under-documented at the moment.
I'll improve this over the next few weeks, but feel free to fire questions
via email.
Best wishes,
Neil
--
Neil C Smith
Artist : Technologist : Adviser
http://neilcsmith.net
Praxis LIVE - open-source, graphical environment for rapid development of
intermedia performance tools, projections and interactive spaces -
http://code.google.com/p/praxis
OpenEye - specialist web solutions for the cultural, education, charitable
and local government sectors - http://openeye.info
--001a11c222ba556b4304dc9a3a4c
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Hi All,
A new build of Pr=
axis LIVE is now available for download.
Praxisan> LIVE is an open-source, graphical environment for rapid
development of intermedia performance tools, projections and
interactive spaces.=A0 This release brings a range of new features for the =
video pipeline, OSC control, some major editing improvements (including cop=
y & paste - who knew that would be so difficult to implement! :-) ), an=
d the rather obviously missing stereo sample player, amongst many other twe=
aks and bug fixes.
Praxis LIVE is available as a Linux .deb packag=
e, Windows .exe installer and as a .zip for
un-installed usage (installed usage is recommended).
Website (with downloads and manual) - raxis" target=3D"_blank">http://code.google.com/p/praxisspan>
Release notes - s" target=3D"_blank">http://code.google.com/p/praxis>/wiki/ReleaseNotes
Some of the new features are conspicuo=
usly under-documented at the moment.=A0 I'll improve this over the next=
few weeks, but feel free to fire questions via email.
Best wishes,
Neil
iv>
--
Neil C Smith
Artist : Technologist : Adviser
ef=3D"http://neilcsmith.net" target=3D"_blank">http://neilcsmith.net
>
Praxis LIVE - open-source, graphical environment for rapid development of i=
ntermedia performance tools, projections and interactive spaces - =3D"http://code.google.com/p/praxis" target=3D"_blank">http://code.google.c=
om/p/praxis
OpenEye - specialist web solutions for the cultural, education, charita=
ble and local government sectors - =3D"_blank">http://openeye.info
--001a11c222ba556b4304dc9a3a4c--
Subject: [LAA] [ANN] Praxis LIVE build:130508
Date: May 13, 3:34 pm 2013
--001a11c222ba556b4304dc9a3a4c
Content-Type: text/plain; charset=ISO-8859-1
Hi All,
A new build of Praxis LIVE is now available for download.
Praxis LIVE is an open-source, graphical environment for rapid
development of intermedia performance tools, projections and
interactive spaces. This release brings a range of new features for the
video pipeline, OSC control, some major editing improvements (including
copy & paste - who knew that would be so difficult to implement! :-) ), and
the rather obviously missing stereo sample player, amongst many other
tweaks and bug fixes.
Praxis LIVE is available as a Linux .deb package, Windows .exe installer
and as a .zip for un-installed usage (installed usage is recommended).
Website (with downloads and manual) - http://code.google.com/p/praxis
Release notes - http://code.google.com/p/praxis/wiki/ReleaseNotes
Some of the new features are conspicuously under-documented at the moment.
I'll improve this over the next few weeks, but feel free to fire questions
via email.
Best wishes,
Neil
--
Neil C Smith
Artist : Technologist : Adviser
http://neilcsmith.net
Praxis LIVE - open-source, graphical environment for rapid development of
intermedia performance tools, projections and interactive spaces -
http://code.google.com/p/praxis
OpenEye - specialist web solutions for the cultural, education, charitable
and local government sectors - http://openeye.info
--001a11c222ba556b4304dc9a3a4c
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Hi All,
A new build of Pr=
axis LIVE is now available for download.
Praxisan> LIVE is an open-source, graphical environment for rapid
development of intermedia performance tools, projections and
interactive spaces.=A0 This release brings a range of new features for the =
video pipeline, OSC control, some major editing improvements (including cop=
y & paste - who knew that would be so difficult to implement! :-) ), an=
d the rather obviously missing stereo sample player, amongst many other twe=
aks and bug fixes.
Praxis LIVE is available as a Linux .deb packag=
e, Windows .exe installer and as a .zip for
un-installed usage (installed usage is recommended).
Website (with downloads and manual) - raxis" target=3D"_blank">http://code.google.com/p/praxisspan>
Release notes - s" target=3D"_blank">http://code.google.com/p/praxis>/wiki/ReleaseNotes
Some of the new features are conspicuo=
usly under-documented at the moment.=A0 I'll improve this over the next=
few weeks, but feel free to fire questions via email.
Best wishes,
Neil
iv>
--
Neil C Smith
Artist : Technologist : Adviser
ef=3D"http://neilcsmith.net" target=3D"_blank">http://neilcsmith.net
>
Praxis LIVE - open-source, graphical environment for rapid development of i=
ntermedia performance tools, projections and interactive spaces - =3D"http://code.google.com/p/praxis" target=3D"_blank">http://code.google.c=
om/p/praxis
OpenEye - specialist web solutions for the cultural, education, charita=
ble and local government sectors - =3D"_blank">http://openeye.info
--001a11c222ba556b4304dc9a3a4c--
Categories: laa
[LAA] SooperLooper 1.7.0 released
From: Kaspar Bumke <kaspar.bumke@...>
Subject: [LAA] SooperLooper 1.7.0 released
Date: May 13, 3:33 pm 2013
--20cf300fac6b8c009204dc83da41
Content-Type: text/plain; charset=ISO-8859-1
Grab the new version on the site:
http://essej.net/sooperlooper/download.html
CHANGES FOR 1.7.0
GUI:
- Fixed SooperLooper being mistakenly identified as remote
- Now ignoring non audio and non .slsess files in load and save file
selection dialogues
- Mute now flashes when waiting to go into mute instead of rev flashing
- Mute of others flashes instead of solo flashing when going in and out of
solo
- Fixed CC bindings for commands that need to be registered as hits
- MIDI bindings choice now sorted alphabetically
- File selector now defaults to home and tracks last load/save
- Removed arbitrary maximum loop memory limit in Add Custom Loop...
- Fixed issue of some controls not showing up when you have more than 5
loops
SooperLooper engine:
- Fixed issue of not being able to load audio files from session when not
started from the same directory
- Fixed fade not working after undo_all
- Removed 1 sample click in multiply
- Fixed individual loop monitor not being sent to main-out
- Fixed toggle MIDI bindings requiring double press when first loaded
- Fixed some clicks when undoing
- Added CCon and CCoff message types to midi bindings
- Can now mute and un-mute when loop is in Off state
- Fixed bug where long-presses were causing undo-all when they weren't
supposed to
OSC:
- OSC Auto Update time can now be set between 10-100ms
- "osc.udp://" can be omitted from the return URL parameter of any OSC
message
- SooperLooper no longer seg-faults when an invalid return URL is given
AU:
- State and waiting AU parameters now working
- Fixed parameter update race condition, so values reflect newly changed
state
- There are now up to 8 stereo sidechain outputs available (individual
outputs for each loop), but for some reason still only 4 stereo inputs
available (at least as shown within Live)... it isn't clear why there are
fewer input buses, it might be a Live limitation.
Others:
- Small maintenance on help output, OSC doc file and indentation, spelling
etc.
- HTML docs on website now include full MIDI command reference
--20cf300fac6b8c009204dc83da41
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Grab the new version on the site:
ej.net/sooperlooper/download.html" target=3D"_blank">http://essej.net/soope=
rlooper/download.html
CHANGES FOR 1.7.0
GUI:
- Fixed S=
ooperLooper being mistakenly identified as remote
- Now ignoring non audio and non .slsess files in load and save file select=
ion dialogues
- Mute now flashes when waiting to go into mute instead of=
rev flashing
- Mute of others flashes instead of solo flashing when goi=
ng in and out of solo
- Fixed CC bindings for commands that need to be registered as hits
- M=
IDI bindings choice now sorted alphabetically
- File selector now defaul=
ts to home and tracks last load/save
- Removed arbitrary maximum loop me=
mory limit in Add Custom Loop...
- Fixed issue of some controls not showing up when you have more than 5 loo=
ps
SooperLooper engine:
- Fixed issue of not being able to load a=
udio files from session when not started from the same directory
- Fixed=
fade not working after undo_all
- Removed 1 sample click in multiply
- Fixed individual loop monitor not=
being sent to main-out
- Fixed toggle MIDI bindings requiring double pr=
ess when first loaded
- Fixed some clicks when undoing
- Added CCon a=
nd CCoff message ty [message continues]
Subject: [LAA] SooperLooper 1.7.0 released
Date: May 13, 3:33 pm 2013
--20cf300fac6b8c009204dc83da41
Content-Type: text/plain; charset=ISO-8859-1
Grab the new version on the site:
http://essej.net/sooperlooper/download.html
CHANGES FOR 1.7.0
GUI:
- Fixed SooperLooper being mistakenly identified as remote
- Now ignoring non audio and non .slsess files in load and save file
selection dialogues
- Mute now flashes when waiting to go into mute instead of rev flashing
- Mute of others flashes instead of solo flashing when going in and out of
solo
- Fixed CC bindings for commands that need to be registered as hits
- MIDI bindings choice now sorted alphabetically
- File selector now defaults to home and tracks last load/save
- Removed arbitrary maximum loop memory limit in Add Custom Loop...
- Fixed issue of some controls not showing up when you have more than 5
loops
SooperLooper engine:
- Fixed issue of not being able to load audio files from session when not
started from the same directory
- Fixed fade not working after undo_all
- Removed 1 sample click in multiply
- Fixed individual loop monitor not being sent to main-out
- Fixed toggle MIDI bindings requiring double press when first loaded
- Fixed some clicks when undoing
- Added CCon and CCoff message types to midi bindings
- Can now mute and un-mute when loop is in Off state
- Fixed bug where long-presses were causing undo-all when they weren't
supposed to
OSC:
- OSC Auto Update time can now be set between 10-100ms
- "osc.udp://" can be omitted from the return URL parameter of any OSC
message
- SooperLooper no longer seg-faults when an invalid return URL is given
AU:
- State and waiting AU parameters now working
- Fixed parameter update race condition, so values reflect newly changed
state
- There are now up to 8 stereo sidechain outputs available (individual
outputs for each loop), but for some reason still only 4 stereo inputs
available (at least as shown within Live)... it isn't clear why there are
fewer input buses, it might be a Live limitation.
Others:
- Small maintenance on help output, OSC doc file and indentation, spelling
etc.
- HTML docs on website now include full MIDI command reference
--20cf300fac6b8c009204dc83da41
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Grab the new version on the site:
ej.net/sooperlooper/download.html" target=3D"_blank">http://essej.net/soope=
rlooper/download.html
CHANGES FOR 1.7.0
GUI:
- Fixed S=
ooperLooper being mistakenly identified as remote
- Now ignoring non audio and non .slsess files in load and save file select=
ion dialogues
- Mute now flashes when waiting to go into mute instead of=
rev flashing
- Mute of others flashes instead of solo flashing when goi=
ng in and out of solo
- Fixed CC bindings for commands that need to be registered as hits
- M=
IDI bindings choice now sorted alphabetically
- File selector now defaul=
ts to home and tracks last load/save
- Removed arbitrary maximum loop me=
mory limit in Add Custom Loop...
- Fixed issue of some controls not showing up when you have more than 5 loo=
ps
SooperLooper engine:
- Fixed issue of not being able to load a=
udio files from session when not started from the same directory
- Fixed=
fade not working after undo_all
- Removed 1 sample click in multiply
- Fixed individual loop monitor not=
being sent to main-out
- Fixed toggle MIDI bindings requiring double pr=
ess when first loaded
- Fixed some clicks when undoing
- Added CCon a=
nd CCoff message ty [message continues]
Categories: laa
[LAA] OpenAV Productions : Sorcer
From: Harry van Haaren <harryhaaren@...>
Subject: [LAA] OpenAV Productions : Sorcer
Date: May 11, 8:10 am 2013
--089e0158ad74d750b604dc5d88d7
Content-Type: text/plain; charset=ISO-8859-1
Hey Everybody,
I'm happy to announce OpenAV productions: http://openavproductions.com
OpenAV productions is a label under which I intend to release my
linux-audio software projects. The focus of the software is on the workflow
of creating live-electronic music and video.
The release system for OpenAV productions is one based on donations and
time, details are available on http://openavproductions.com/support
Sorcer is a wavetable synth, and is ready for release. Check out the
interface and demo reel on http://openavproductions.com/sorcer
Greetings from the LAC, -Harry
--089e0158ad74d750b604dc5d88d7
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Hey Everybody,
I'=
;m happy to announce OpenAV productions: s.com">http://openavproductions.com
OpenAV productions is a l=
abel under which I intend to release my linux-audio software projects. The =
focus of the software is on the workflow of creating live-electronic music =
and video.
The release system for OpenAV productions is one based on donatio=
ns and time, details are available on om/support">http://openavproductions.com/support
Sorcer is=
a wavetable synth, and is ready for release. Check out the interface and d=
emo reel on http://openavpr=
oductions.com/sorcer
Greetings from the LAC, -Harry
--089e0158ad74d750b604dc5d88d7--
Subject: [LAA] OpenAV Productions : Sorcer
Date: May 11, 8:10 am 2013
--089e0158ad74d750b604dc5d88d7
Content-Type: text/plain; charset=ISO-8859-1
Hey Everybody,
I'm happy to announce OpenAV productions: http://openavproductions.com
OpenAV productions is a label under which I intend to release my
linux-audio software projects. The focus of the software is on the workflow
of creating live-electronic music and video.
The release system for OpenAV productions is one based on donations and
time, details are available on http://openavproductions.com/support
Sorcer is a wavetable synth, and is ready for release. Check out the
interface and demo reel on http://openavproductions.com/sorcer
Greetings from the LAC, -Harry
--089e0158ad74d750b604dc5d88d7
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Hey Everybody,
I'=
;m happy to announce OpenAV productions: s.com">http://openavproductions.com
OpenAV productions is a l=
abel under which I intend to release my linux-audio software projects. The =
focus of the software is on the workflow of creating live-electronic music =
and video.
The release system for OpenAV productions is one based on donatio=
ns and time, details are available on om/support">http://openavproductions.com/support
Sorcer is=
a wavetable synth, and is ready for release. Check out the interface and d=
emo reel on http://openavpr=
oductions.com/sorcer
Greetings from the LAC, -Harry
--089e0158ad74d750b604dc5d88d7--
Categories: laa
[LAA] Vamp plugin SDK v2.5 and Sonic Annotator v1.0 now available
From: Chris Cannam <cannam@...>
Subject: [LAA] Vamp plugin SDK v2.5 and Sonic Annotator v1.0 now available
Date: May 11, 8:10 am 2013
Version 2.5 of the Vamp plugin SDK, the audio analysis and feature
extraction plugin standard from the Centre for Digital Music at QMUL,
is now available. This is a bugfix release.
http://www.vamp-plugins.org/
Vamp is a plugin API for audio analysis and feature extraction plugins
written in C or C++. Its SDK features an easy-to-use set of C++
classes for plugin and host developers, a reference host
implementation, example plugins, and documentation. It is supported
across Linux, OS/X, and Windows.
Version 1.0 of Sonic Annotator is also now available. This is a
utility program for batch feature extraction from audio files. It
runs Vamp audio analysis plugins with specified parameters on audio
files, and writes the result features in a selection of formats.
Version 1.0 is a bugfix release, and also represents a decision to
finally number a release as 1.0 having had only 0.x releases to date.
http://www.omras2.org/SonicAnnotator
Chris
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Subject: [LAA] Vamp plugin SDK v2.5 and Sonic Annotator v1.0 now available
Date: May 11, 8:10 am 2013
Version 2.5 of the Vamp plugin SDK, the audio analysis and feature
extraction plugin standard from the Centre for Digital Music at QMUL,
is now available. This is a bugfix release.
http://www.vamp-plugins.org/
Vamp is a plugin API for audio analysis and feature extraction plugins
written in C or C++. Its SDK features an easy-to-use set of C++
classes for plugin and host developers, a reference host
implementation, example plugins, and documentation. It is supported
across Linux, OS/X, and Windows.
Version 1.0 of Sonic Annotator is also now available. This is a
utility program for batch feature extraction from audio files. It
runs Vamp audio analysis plugins with specified parameters on audio
files, and writes the result features in a selection of formats.
Version 1.0 is a bugfix release, and also represents a decision to
finally number a release as 1.0 having had only 0.x releases to date.
http://www.omras2.org/SonicAnnotator
Chris
_______________________________________________
Linux-audio-announce mailing list
Linux-audio-announce@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-announce
Categories: laa
[LAA] Mixxx 1.11.0 Released
From: RJ Ryan <rryan@...>
Subject: [LAA] Mixxx 1.11.0 Released
Date: May 10, 8:18 am 2013
--047d7b15fa01372ff404dc4cd6cf
Content-Type: text/plain; charset=ISO-8859-1
On behalf of the Mixxx development team, I'm pleased to announce the
release of Mixxx 1.11.0!
After over a year of work by the team, Mixxx 1.11.0 adds several exciting
new features including 3-band colored waveforms, a completely new and
high-accuracy beat detector, HID controller support, a session history
feature, a new beatloop-roll effect, a library preview deck,
point-and-click MIDI mapping, advanced search, and much more!
For a full list of new features in Mixxx 1.11.0, please see our blog post:
http://mixxxblog.blogspot.com/2013/05/mixxx-1110-is-here.html
If you would like to link to our website, we have prepared a "What's New"
splash page to describe the new features in Mixxx 1.11:
http://mixxx.org/whats-new-in-mixxx-1-11
Mixxx is a Free and open-source software project produced by volunteers
from around the world. For more information about the project and its
history please check out our website: http://mixxx.org/press/
Best regards,
RJ Ryan
Mixxx Lead Developer
--047d7b15fa01372ff404dc4cd6cf
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
On behalf of the Mixxx development team, I'm plea=
sed to announce the release of Mixxx 1.11.0!
A=
fter over a year of work by the team, Mixxx 1.11.0 adds several exciting ne=
w features including 3-band colored waveforms, a completely new and high-ac=
curacy beat detector, HID controller support, a session history feature, a =
new beatloop-roll effect, a library preview deck, point-and-click MIDI mapp=
ing, advanced search, and much more!
For a full list of new features in Mixxx 1.11.0, please=
see our blog post:/05/mixxx-1110-is-here.html">http://mixxxblog.blogspot.com/2013/05/mixxx-11=
10-is-here.html
If you would like to link to our website, we have=
prepared a "What's New" splash page to describe the new feat=
ures in Mixxx 1.11:=A0
>http://mixxx.org/whats-new-in-mixxx-1-11
=
Mixxx is a Free=
and open-source software project produced by volunteers from around the wo=
rld. For more information about the project and its history please check ou=
t our website:=A0amily:arial,sans-serif;font-size:13px" target=3D"_blank">http://mixxx.org/p=
ress/
Best regards,RJ Ryan=A0Mixx=
x Lead Developer
--047d7b15fa01372ff404dc4cd6cf--
Subject: [LAA] Mixxx 1.11.0 Released
Date: May 10, 8:18 am 2013
--047d7b15fa01372ff404dc4cd6cf
Content-Type: text/plain; charset=ISO-8859-1
On behalf of the Mixxx development team, I'm pleased to announce the
release of Mixxx 1.11.0!
After over a year of work by the team, Mixxx 1.11.0 adds several exciting
new features including 3-band colored waveforms, a completely new and
high-accuracy beat detector, HID controller support, a session history
feature, a new beatloop-roll effect, a library preview deck,
point-and-click MIDI mapping, advanced search, and much more!
For a full list of new features in Mixxx 1.11.0, please see our blog post:
http://mixxxblog.blogspot.com/2013/05/mixxx-1110-is-here.html
If you would like to link to our website, we have prepared a "What's New"
splash page to describe the new features in Mixxx 1.11:
http://mixxx.org/whats-new-in-mixxx-1-11
Mixxx is a Free and open-source software project produced by volunteers
from around the world. For more information about the project and its
history please check out our website: http://mixxx.org/press/
Best regards,
RJ Ryan
Mixxx Lead Developer
--047d7b15fa01372ff404dc4cd6cf
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
On behalf of the Mixxx development team, I'm plea=
sed to announce the release of Mixxx 1.11.0!
A=
fter over a year of work by the team, Mixxx 1.11.0 adds several exciting ne=
w features including 3-band colored waveforms, a completely new and high-ac=
curacy beat detector, HID controller support, a session history feature, a =
new beatloop-roll effect, a library preview deck, point-and-click MIDI mapp=
ing, advanced search, and much more!
For a full list of new features in Mixxx 1.11.0, please=
see our blog post:/05/mixxx-1110-is-here.html">http://mixxxblog.blogspot.com/2013/05/mixxx-11=
10-is-here.html
If you would like to link to our website, we have=
prepared a "What's New" splash page to describe the new feat=
ures in Mixxx 1.11:=A0
>http://mixxx.org/whats-new-in-mixxx-1-11
=
Mixxx is a Free=
and open-source software project produced by volunteers from around the wo=
rld. For more information about the project and its history please check ou=
t our website:=A0amily:arial,sans-serif;font-size:13px" target=3D"_blank">http://mixxx.org/p=
ress/
Best regards,RJ Ryan=A0Mixx=
x Lead Developer
--047d7b15fa01372ff404dc4cd6cf--
Categories: laa